Showing posts with label Xbox 360 red light fix. Show all posts
Showing posts with label Xbox 360 red light fix. Show all posts

Xbox 360 Red Lights Repair

Saturday, June 20, 2009 0 comments

If you've got the Xbox 360 Red Rings of Death then your system is telling you that a general hardware failure has just occurred. Repairing your 360 is fairly easy, so it shouldn't cause you any worry as to how you will get the Xbox 360 red lights repaired. Many people will often say 'Just send it in to Microsoft' but this is problematic as explained here. It is actually recommended that you fix your console yourself. Doing it yourself you are guaranteed a permanent way to repair your console, your system can be repaired the very day you make the repair, and it's not going to cost you an arm and a leg to get your console fixed. Otherwise if you were to trust Microsoft it's going to be anywhere from 1 to 6 weeks for you to see your system again, sometimes months. It's going to cost over $140 to send it in if you're not under warranty. And Microsoft doesn't even have a permanent repair. So sending your console to them is pointless from the get-go.

Once I discovered what was really going with Microsoft and their 'Repair Methods' I opted for an alternative solution. I found a series of Xbox 360 repair guides that offered to me how to 'properly' repair the red ring of death. I took a plunge with these guides as nothing else seemed to offer permanent results and I was more than surprised with the results I did get. Inside of the Xbox 360 Red Light Fix Pro Repair Guide (the repair guide I used) I was given step-by-step video and written tutorials guiding me through everything that I needed to know to repair my console. After watching the videos and reading the repair manual I realized the cause behind the RROD and how this repair method might actually be able to repair it. So I wen't ahead and made the repair to my console.

I first had to disassemble my console by following along with the video tutorials. After my console was disassembled I was able to get to the parts of the 360 that needed the actual repair. I first had to remove the old thermal paste (used to protect the GPU and CPU) from the GPU and CPU by using a specific cleaning solution outlined and recommended by the guide. After removing the old ineffective thermal paste I re-applied a new solution that would be able to tolerate the heat levels inside of the 360. That didn't take me any longer than 10 minutes to repair.

Once the GPU and CPU were fixed I then had to make a small adjustment to the Heat Sinks which are used to absorb and filter out heat from reaching and affecting the GPU and CPU. The problem here is that the Heat Sinks were placed on the motherboard poorly so they don't protect the GPU and CPU and eventually the GPU and CPU overheat and that causes the RROD. So what I had to do was remove the old X-Clamps which held the Heat Sinks down and re-apply a better way of holding the Heat Sinks in place. This was done with a specific set of washers and screws. After this the repair was finished. I don't remember how long it took my but it was really fast. After I was finished I plugged everything in and turned my console on and it worked! Haven't had any problems since making that repair which was like 5 months or so ago.

Be sure that you seriously consider using one of these Xbox 360 repair guides
as they will permanently solve the RROD for good. Again I would highly advise the use of the Xbox 360 Red Light Fix Pro Gamer Edition as your guide of choice as that is the same guide that I used I definitely got good results.


Xbox 360 Red Light Fix Solution

Saturday, June 13, 2009 1 comments
The Xbox 360 is the gaming system of choice for dedicated gamers who spend countless hours playing. The console is a very complicated electronic device and not just a expensive toy so it requires the utmost care to prevent serious problems. The system can malfunction from excessive use and mistreatment. Your console can also malfunction if it comes with a factory defect such as the red rings of death. No matter why the system breaks, you'll need to repair it if it stops working. That's why you need a genuine repair guide for your system such as The Red Light Fix Pro Gamer Edition. The repair guide that I am referring to can be located here at , Xbox 360 Red Light Fix

If you need to fix your system after getting the 3 Red Light issues that commonly appears when a system is damaged, The Red Light Fix Pro Gamer Edition is the manual for you. This tutorial can show you how to handle other annoying glitches with your console too such as, distorted images, game freezes, 2 and 4 red light error codes, and the E74 error.

By using the guide, even a novice can repair his or her system. The Red Light Fix Pro Gamer Edition is a written repair guide and video tutorial that will walk you through the entire process of the fix. You can be on your way to repairing your rig with a easy download.

wait...isn't it dangerous to try and repair our system ourself? Shouldn't I just use my warranty? You might be wondering. Unfortunately the warranty that comes with the your console is pretty much worthless. It's a lot easier and effective to order the repair guide for your console rather than wait on Microsoft to fulfill the warranty. For information on why using a repair guide is the best route to take, see Xbox 360 Red Light Fix vs. Microsoft

Don't let a lack of experience keep you from fixing your system. This handy guide will allow you to fix your Xbox 360 with little effort. The Red Light Fix Pro Gamer Edition allows owners to see a comprehensive guide to mending their broken systems. Starting on your project is as simple as downloading a program from a Web site. Why not let Microsoft to repair the malfunctioning part? Microsoft's service record is appalling leaving many customers displeased. Some problems that were regular for Xbox users include:

  • The problems with the 3 red lights are not solved because the corporation's technical support doesn't always completely repair your console.
  • Users having to wait two months for their Xbox 360's to come back home to them.
  • You may have to fork over $140 + if you use Microsoft's technical support and are not under warranty or it has since expired.
Relying on Microsoft to repair the problem with the red rings of death probably won't be the best choice to fix your system. As a recommendation from millions of unsatisfied customers of Microsoft, avoid Microsoft's technical support repair service like the plague and count on only yourself to fix your Xbox. Take advantage of this cost effective way to repair your system by utilizing an Xbox 360 repair guide to help you permanently fix your Xbox 360. If you are already experiencing major problems or the Red Rings of Death, your best bet would be to check out a Xbox 360 Repair Guides


How to Repair Xbox 360 Red Rings of Death Permanently

Thursday, June 11, 2009 0 comments

Xbox 360 owners struggling with the red lights of death and other difficulties no longer have to worry because there is an answer for you yet. Here's a walk through on how to repair Xbox 360 red lights. The very useful Xbox 360 red light fix pro repair guide is the basis for this simple guide. This information has received positive reviews from many Xbox owners, who are happy with its efficiency and efficacy. To see this professionally written guide and get my full review on it visit, Xbox 360 Red Light Fix

The first step in taking care of the problem is taking your system apart. Most users performing the console repair are understanding of this. Many of these owners may not be aware that they are violating their warranty by taking their console apart. You should keep this in mind when you try to take care of the system. Don't let this unhappy fact deter you from repairing your Xbox. Repairing the system yourself is much better than counting on your your warranty to have the system repaired. You can fix the console yourself, and get the job done a lot more swiftly than the the manufacturer. To learn more go to, How to Repair Xbox 360

Your local hardware seller has all the implements you need for this project. To complete this project you'll need some inexpensive tools such as a T-10/T-8 screwdriver, a flathead screwdriver, a small knife, pliers, a simple paperclip, and thermal compound paste. A little harder to find will be an Arctic Silver cleaning kit, which you may have to search local electronic stores for or buy on the Web.

When you have all your implements, your first step will be to remove the casing on your console. You may be frightened about damaging your Xbox by doing this, but it's a fairly simple process. Your console's hard drive ventilation shield is also fairly easy to work on. When fixing your system's hard drive ventilation shield, you should be careful. By handling your console with care, you can forestall further damage.

While opening the ventilation shields is tricky, if you follow a few simple directions you won't have problem. Removing the console's casing and the tabs that hold the casing together are what you must do to accomplish this. This is the segment of the repair process for your system where you use the knife and it's not a hard process. By following the instructions, you can remove the casing without screwing up the Xbox.

You will need to handle the console with care, but this should not be a problem. If you pay focused attention to the photos, you won't make any mistakes concerning what needs to be unfastened. The directions also show which screws need to be removed to get to the interior of the system's hard drive.

For a more thorough examination, take a look at the system's DVD drive and the fan shroud. You need to be gentle, because the Xbox's fan shroud can break easily. Follow the directions and work meticulously and this won't be tough. To get closer to the trouble spot, your next move is to remove the system's RF module. The console's Mother Board will be easy to access once you take out the RF Module.

Once you take out the Mother Board, you need to remove the Xbox's X Clamps. You can split the system's heat sinks once you've done this. Once you have gained access to your console's mother board, you can use Arctic Silver 5 to replace the compromised thermal compound that's causing problems.

Some of system's nylon screws, steel screws and washers now need to be swapped out. This won't be difficult if you carefully follow the illustrations in the guide. You are more or less finished once you do this task. All that's left to complete is to go back and reassemble the console. Once again, there is a useful video to aid you do this part of the Xbox repair process. You can check out all of my recommended Xbox 360 repair guides and get more information at, www.360profix.com

Why you should own an Xbox 360 Repair Guide

Thursday, May 28, 2009 0 comments
Upon the Xbox 360’s release in 2005 it was immediately discovered that the console had major performance problems and errors. Until recently a permanent solution had not been found for the performance issues experienced by the 360. A series of Xbox 360 Repair Guides that have recently been released are the only known sources of information to permanently solve the Red Rings of Death error. For the best repair guides to fix your Xbox 360, take a look at Xbox 360 Red Light Repair Guide

It is for the very reason that it took over 3 years for a permanent solution to be found to the RROD error that I think it is essential that all Xbox 360 owners arm themselves with the proper information that will free them from the RROD error. The Red Ring of Death Error is a serious issue that should not be disregarded. The Red Ring of Death has been attempted to be resolved by many using many different methods, but most of these are only temporary, and most of these are often harmful for your console. Once confronted with the RROD most 360 users tend to resort to the technical assistance of Microsoft.

I resorted to Microsoft more than once and my Xbox 360 never returned back to me completely fixed. Turning to Microsoft may not be the best choice to take and I’ll let you know why. I as well as millions of other 360 owners have consulted with Microsoft to only get our systems back months later unfixed. Within a few weeks of getting my console back from Microsoft the Red Rings of Death came back - I was pretty angry. Millions worldwide have also experienced this inconvenience with Microsoft’s customer support. And on top of that, if you are not covered under warranty look forward to dishing out a few hundred dollars just to send your system off to not see it until maybe 2 months later, if you’re lucky. Now I don’t know whats worse-waiting two months for your system, forking out $165, or getting a system back that fails on you within a few weeks time. So what sounds like a better deal: spending money to get no real fix, or taking matters into your own hands and permanently fixing your 360 yourself at less than half the cost of Microsoft’s fees?

Like thousands of other Xbox 360 users I searched all over the Internet for a reliable and guaranteed solution and was fortunate enough to have found one. In all honesty I like tons of other 360 owners, were tired of the lack of confidence that we had for Microsoft and all the bogus methods that are being touted as the solution online, like “The Towel Trick”. The Towel Trick is a particularly dangerous temporary fix because if done improperly you can end up frying your system. For the best and most reliable information, see http://www.360profix.com

As I’ve said there is one permanent solution and the essential and only Xbox 360 Repair Guide that you are ever going to need. There are only about 4 repair guides that I recommend using over any others as these have been verified by myself and have worked for thousands of others. The guides require that you go into your system, repair one vital aspect to your 360 and you’re done. Try not to think to much about the fact that these guides are “Self-Fix-It” methods because the process is very simple and easy. While this can be daunting at first glance I can assure you that the process is very simple, you are guided 100 percent of the way through video tutorial and will take you less than 1 hours. I’m glad that I found these repair guides because prior to finding them I used the “Towel Trick” and fried an Xbox 360 so I had to buy a new one. It was only after I had found the Repair Guides that I no longer had any further problems.

I can’t recommend these repair guides enough and think it would be very wise if 360 users who haven’t experienced the red ring of death grab a copy just in case worse comes to worst. There are just too many dodgy and unreliable sources of information out there that will leave you running in a wheel. So I feel overall that it’s just best to fix the problem ourselves instead of relying on unreliable and risky methods and unreliable services, especially because doing it ourselves we are guaranteed a permanent fix. It’s my hope that this article will prompt you to take action if your Xbox 360 needs to be fixed. I have reviewed my personal favorite repair guide so, take a look at Xbox 360 Red Light Fix

xbox 360 red light fix pro repair guide